Huawei unveiled the Mate 20 Lite smartphone which is a successor to Mate 10 Lite, with features including the latest HiSilicon Kirin 710 SoC, a 19.5:9 display with a notch, dual cameras on both front and back, and certain AI capabilities. The device runs on Android 8.1 Oreo. If you’re one of the Huawei Mate 20 Lite (model no SNE-AL00) users and want to find out Test Point to Remove FRP lock, Huawei ID, User Lock, and Firmware Flashing then follow this article.

Here we’ll gonna share how you can find out the Huawei Mate 20 Lite SNE-AL00 Test Point, or get into the Download Mode (Emergency Download Mode) so that you can perform multiple advanced level tasks by yourself. You can basically use this test point in any box-like tools such as the Sigma Key, MRT key tool, UFI, UMT, Medusa. All you need is to just shoot the gold point to the ground and then connect a USB cable.

Why Do We Need TestPoint?

  • Install the firmware file on Huawei Mate 20 Lite.
  • You can remove Huawei ID using Test Point
  • Repair IMEI and NVRAM using it
  • Restore or Unbrick dead Huawei Mate 20 Lite by flashing firmware.
  • Easy to remove FRP lock or screen lock

Where to Find Test Point in Huawei Mate 20 Lite

  • First, Download and Install Huawei USB Drivers on Windows PC.
  • Remove the back panel of the Huawei Mate 20 Lite device carefully. Try not to damage hardware parts.
  • Now, check the screenshot below to find out the Huawei Mate 20 Lite Test Points.

How to Remove Huawei Mate 20 Lite SNE-AL00 FRP Lock

You can easily use the EFT dongle, UMT dongle, Octopus FRP tool, MRT key tool, etc to remove FRP (Factory Reset Protection) tool and bypass the screen lock (pattern/pin/password) from the Huawei Mate 20 Lite.

Otherwise, you can try other tools to use the test point to boot your phone in an emergency download mode by removing the battery and short test point to the ground & inserting a USB cable.

So, if you’re interested in booting your Huawei Mate 20 Lite SNE-AL00 device into the Download Mode to flash the Stock Firmware then this article is for you. While if you want to install the software on bootloader-locked Huawei Mate 20 Lite SNE-AL00 then you’ll have to boot it into the EDL mode then you can flash the stock firmware.

How to Remove Huawei ID on Huawei Mate 20 Lite SNE-AL00 FRP Lock

  • Download and install the SigmaKey Software on your computer.
  • Connect your device to PC using a USB Cable in upgrade mode
  • Select the Serial Port as DBA Adaptor Port.
  • Select the Software Testpoint On Off
  • Now load the downloaded firmware package “UPDATE.APP”
  • The software will start the flashing process. Wait for a few seconds or minutes to complete the process on your Huawei Mate 20 Lite. Do not remove your device.
  • After the process, the device will enter factory mode.
  • Now you can connect your device again by removing and connecting the USB cable again.
  • Now under serial port, make sure you select USB (autodetect)
  • Select Authorize has Huawei
  • Tap on Remove Huawei ID.
  • The process will begin to remove the firmware protection, also called FRP lock.
  • After successfully removing the Huawei ID, you have to set the testpoint OFF. This will again revive the phone from factory mode to normal phone mode.
  • Select the Serial Port as USB (autodetect), Authorize with device model, and then tap the Software Testpoint on/off.
  • After completing the process, your device will be back to normal

That’s it, guys. We hope this guide was helpful to you. For additional queries, you can comment below.

Huawei Mate 20 Lite Specifications:

Huawei Mate 20 Lite features a 6.3 -inches IPS LCD display with a screen resolution of 1080 x 2340 pixels. The smartphone is powered by an Octa-core Hisilicon Kirin 710 processor coupled with 4/6GB of RAM. The phone packs 64GB internal memory which can also be expanded up to 256GB via microSD card. The camera on the Huawei Mate 20 Lite comes with Dual 20MP + 2MP phase detection autofocus, LED flash rear camera, and also Dual 24MP + 2MP depth sensor front shooting camera.

Huawei Mate 20 Lite runs on Android 8.1 Oreo and a Non-removable Li-Po 3750 mAh battery with fast charging. It also has a fingerprint sensor on the back. The handset supports a dual sim with 4G on both slots. It comes with connectivity options such as Bluetooth, Wifi, USB OTG, FM, 3G, and 4G.