Huawei Y5 2019 was launched in the year 2019 which came out of the box with Android 9.0 Pie under EMUI 9.1 skin. It is powered by a Mediatek MT6761 Helio A22 processor. But if you’re one of the Huawei Y5 2019 AMN-LX1, AMN-LX3 users and want to find out Test Point to Remove FRP lock, User Lock, and Firmware Flashing then follow this article.
Here we’ll gonna share how you can find out the Huawei Y5 2019 AMN-LX1, AMN-LX3 Test Point, or get into the Download Mode (Emergency Download Mode) so that you can perform multiple advanced level tasks by yourself. You can basically use this test point in any box-like tools such as the MRT key tool, UFI, UMT, Medusa. All you need is to just shoot the gold point to the ground and then connect a USB cable.
Why Do We Need TestPoint?
- Install the firmware file on Huawei Y5 2019.
- You can remove Huawei ID using Test Point
- Repair IMEI and NVRAM using it
- Restore or Unbrick dead Huawei Y5 2019 by flashing firmware.
- Easy to remove FRP lock or screen lock
Where to Find Test Point in Huawei Y5 2019
- First, Download and Install Huawei USB Drivers on Windows PC.
- Remove the back panel of the Huawei Y5 2019 device carefully. Try not to damage hardware parts.
- Now, check the screenshot below to find out the Huawei Y5 2019 Test Points.
How to Remove Huawei Y5 2019 AMN-LX1, AMN-LX3 FRP Lock
You can easily use the EFT dongle, UMT dongle, Octopus FRP tool, MRT key tool, etc to remove FRP (Factory Reset Protection) tool and bypass the screen lock (pattern/pin/password) from the Huawei Y5 2019.
Otherwise, you can try other tools to use the test point to boot your phone in an emergency download mode by removing the battery and short test point to the ground & inserting a USB cable.
So, if you’re interested in booting your Huawei Y5 2019 AMN-LX1, AMN-LX3 device into the Download Mode to flash the Stock Firmware then this article is for you. While if you want to install the software on bootloader locked Huawei Y5 2019 AMN-LX1, AMN-LX3 then you’ll have to boot it into the EDL mode then you can flash the stock firmware.
Reset FRP using UMT Tool:
- Open Ultimate Multi-Tool
- Select Tools/FRP tab
- Choose custom DA and choose the DA File
- Select the Auth and Preloader file.
- To Remove FRP lock, bypass security lock such as Code, PIN, Gesture Lock, Fingerprint, etc. Check box the Reset FRP option
- Now under by platform, select your processor and EMMC as storage.
- Tap on Reset FRP to start the reset process.
- Now, if your screen says waiting for the phone in BROM mode, you can connect your device via testpoint.
- Once you are connected, your device will start to reset.
- After erasing the userdata and FRP data, your device will reboot.
- That’s it, friends, you have successfully reset the FRP and also this process will erase Pin, pattern lock, gesture lock, fingerprint, and many more.
That’s it, guys. We hope this guide was helpful to you. For additional queries, you can comment below.